The
240 DriveRack® Complete Equalization and Loudspeaker System from
dbx® Professional Products continues the legacy of excellence for
all-inclusive loudspeaker management systems set by the 480 DriveRack®.
Following in the footsteps of its legendary big brother, the 480 DriveRack®,
the 240 is the only unit required between the mixing console and poweramps.
With the 240 DriveRack®, you will no longer have to contest with
the obstacles presented by the large and cumbersome loudspeaker management
system racks of the past. With the 240 DriveRack’s all-inclusive
signal processing combined with its single rack unit chassis design
and affordable price point, the 240 DriveRack® is an absolute must
for any loudspeaker management application.
|
|
• Input – routing with 2x2 mixer to combine any combination
of inputs.
• Pre-EQ is 31 band graphic or 9 band parametric on each input.
+/- 12dB boost/cut.
• Crossover: 1x4 max with band summing. Linkable for stereo inputs.
1/12 octave centers. Selectable filters including Butterworth, Bessel,
and Linkwitz-Riley. Selectable slopes up to 24dB.
• PC DriveWare™ Interface
• Post EQ is 4 band parametric per output. Selectable shelves or
Bell curves. 1/12 octave centers, Q selectable from 0.25 to 16.
•Dynamics – Compressor/Limiter: Linkable with PeakStopPlus™
• Pre X-Over Delay – 1 second per input with 20uS resolution.
• Post X-Over Delay – 365mS per output with 20uS resolution.
• Output – Phase compensation and routing.
|